The best rated pressure washer  is a brilliant device that will efficiently clean from your house sidings to the walkways, patios, decks, and more. To help you maintain your pressure washer for home use in good condition, we are here to tackle the 5 common questions you may have concerning routine maintenance and troubleshooting.

A: What is the routine maintenance for my pressure washer?

Q: You should change the oil every 50 hours of operation, replace the ignition plug and the air filter on the washer annually to ensure its smooth operation.

A: How do I store my pressure washer in the winter?

Q: The more thorough you are with cleaning the machine before putting it away, the less work you have to do when it is time that you take it out again. Storing your pressure washer in bad condition may cost you extra money to buy replacement parts or a whole new pump. Therefore, we strongly advise you to follow the steps below to prepare your pressure washer for extended storage.

Fuel tank: If you have one of the gas-powered washers, make sure you will not leave gas unattended in the tank over the winter. Gas can deteriorate and become very difficult to remove. You have two options, either to empty the gas tank by running the device until all fuel is used up or to put in a fuel stabilizer.

Water pump and hose reels: As liquid will expand when it gets frozen, the cold weather will expose your pump and garden hose to the possibility of getting splits and cracks caused by leave-in water. Thus, it is crucial that you drain liquid from those parts to avoid potential damages.

First, squeeze all the remaining water trapped inside the spray gun out, then detach the hose reels from the nozzle and move on to empty the water the best you can from these places. Next, disconnect the pump from the engine and pull the handle to remove water from the pump. At the end, fill the pump and hose with the antifreeze until next use.

Finally, pick a dry and cool space to put your  highest rated pressure washer.

A: How can I fix a leaky hose?

Q: The answer is you don’t. If your high-pressure hose gets a puncture in it, normal fixing will not work, and attempting to do so can even lead to safety hazards. At a powerful pressure as high as 3,000 PSI or more, the water will break through poorly constructed barriers and shoot right into your skin or inflict damages on your surrounding properties. It is best to ditch old hose reels and invest in a new one to prevent such safety issues from happening.

A: What if I experience a weak spray?

Q: There are several things you should check if you notice a low pressure at the spray wand. First, check if the water supply at the inlet is sufficient and if there is a clog that restricts the flow rate. If the problem does not recede, clean the spray wand and check if the hoses reels get clogged. Lastly, the low pressure problem could originate from the pump. If this is the case, you may want to consider replacing the entire pump.

A: What if the spray is too strong?

Q: Usually, this is caused by a broken unloader valve that can no longer recirculate water from the spray gun to the pump inlet. Whenever you notice there is pressure built up at the spray gun when it is not in use, it is probably time to order a new replacement.

Find more useful information and a compiled list of best pressure washer  in our experts’ home pressure washer reviews here.